Now Playing Tracks

weaponoutfitters: I remember the good ole days, when all the posers just said they were snipers.Any “sniper” that doesn’t know the transsonic threshhold of M118LR out of 3 different types of guns is a fucking liar.As for universal questions for “snipers” of all ages (“I was a sniper in the 80s!”), any “sniper” that can’t immediately tell you the distance between the two leading edges of mil-dots is also, very suspect.  If you spends WEEKS looking through and using mil-dots at school, then YEARS looking through mil dots in the field…  .mil to MOA conversion is also a great way to trip up the poser d-bags
Zoom Info
Camera
Canon EOS 5D Mark III
ISO
1250 		Aperture
f/5.6
Exposure
1/13th 		Focal Length
50mm

weaponoutfitters:

I remember the good ole days, when all the posers just said they were snipers.

Any “sniper” that doesn’t know the transsonic threshhold of M118LR out of 3 different types of guns is a fucking liar.

As for universal questions for “snipers” of all ages (“I was a sniper in the 80s!”), any “sniper” that can’t immediately tell you the distance between the two leading edges of mil-dots is also, very suspect.  If you spends WEEKS looking through and using mil-dots at school, then YEARS looking through mil dots in the field…  .mil to MOA conversion is also a great way to trip up the poser d-bags

tacblog1: mattelrifle: Finished my carbine.  The goal was to keep a home defense/SHTF because of massive earth quake carbine simple and low cost without sacrificing quality.  Quick plug for Dennis Todd (DToddMG@aol.com).  Dennis is a collector with hard to find firearm parts.  I bought an N marked Colt fiberite stock from him which Colt does not make anymore.  It is a battle used stock (rack number still on it, I didn’t paint that nor would I ever) because Dennis sold out of newer condition stocks, so if you’re looking for something that is out of production he might have it.  The weapon light pictured is an Inforce APL (200 lumens w/ 1.5hrs run time) mounted on a Midwest Industries FSP rail.  I picked the APL because it has a momentary/constant setting and is comfortable to press with the way it is mounted.  The handguard had to be drilled into so the IWC QD mount could be installed.  The QD mount is held by a ring similar to a piston ring found on motorcycles but smaller and set screws.   Parts List: BCM M4 SOCOM upper  BCM carrying handle BCM FA BCG Midwest Industries FSP rail Inforce APL IWC QD Mount RRA CAR handguard BCM H buffer/tube/spring Colt N marked Fiberite stock Mega lower w/ PSA LPK and ACT ALG BFG VCAS Sling BCM win
Zoom Info
tacblog1: mattelrifle: Finished my carbine.  The goal was to keep a home defense/SHTF because of massive earth quake carbine simple and low cost without sacrificing quality.  Quick plug for Dennis Todd (DToddMG@aol.com).  Dennis is a collector with hard to find firearm parts.  I bought an N marked Colt fiberite stock from him which Colt does not make anymore.  It is a battle used stock (rack number still on it, I didn’t paint that nor would I ever) because Dennis sold out of newer condition stocks, so if you’re looking for something that is out of production he might have it.  The weapon light pictured is an Inforce APL (200 lumens w/ 1.5hrs run time) mounted on a Midwest Industries FSP rail.  I picked the APL because it has a momentary/constant setting and is comfortable to press with the way it is mounted.  The handguard had to be drilled into so the IWC QD mount could be installed.  The QD mount is held by a ring similar to a piston ring found on motorcycles but smaller and set screws.   Parts List: BCM M4 SOCOM upper  BCM carrying handle BCM FA BCG Midwest Industries FSP rail Inforce APL IWC QD Mount RRA CAR handguard BCM H buffer/tube/spring Colt N marked Fiberite stock Mega lower w/ PSA LPK and ACT ALG BFG VCAS Sling BCM win
Zoom Info
tacblog1: mattelrifle: Finished my carbine.  The goal was to keep a home defense/SHTF because of massive earth quake carbine simple and low cost without sacrificing quality.  Quick plug for Dennis Todd (DToddMG@aol.com).  Dennis is a collector with hard to find firearm parts.  I bought an N marked Colt fiberite stock from him which Colt does not make anymore.  It is a battle used stock (rack number still on it, I didn’t paint that nor would I ever) because Dennis sold out of newer condition stocks, so if you’re looking for something that is out of production he might have it.  The weapon light pictured is an Inforce APL (200 lumens w/ 1.5hrs run time) mounted on a Midwest Industries FSP rail.  I picked the APL because it has a momentary/constant setting and is comfortable to press with the way it is mounted.  The handguard had to be drilled into so the IWC QD mount could be installed.  The QD mount is held by a ring similar to a piston ring found on motorcycles but smaller and set screws.   Parts List: BCM M4 SOCOM upper  BCM carrying handle BCM FA BCG Midwest Industries FSP rail Inforce APL IWC QD Mount RRA CAR handguard BCM H buffer/tube/spring Colt N marked Fiberite stock Mega lower w/ PSA LPK and ACT ALG BFG VCAS Sling BCM win
Zoom Info
tacblog1: mattelrifle: Finished my carbine.  The goal was to keep a home defense/SHTF because of massive earth quake carbine simple and low cost without sacrificing quality.  Quick plug for Dennis Todd (DToddMG@aol.com).  Dennis is a collector with hard to find firearm parts.  I bought an N marked Colt fiberite stock from him which Colt does not make anymore.  It is a battle used stock (rack number still on it, I didn’t paint that nor would I ever) because Dennis sold out of newer condition stocks, so if you’re looking for something that is out of production he might have it.  The weapon light pictured is an Inforce APL (200 lumens w/ 1.5hrs run time) mounted on a Midwest Industries FSP rail.  I picked the APL because it has a momentary/constant setting and is comfortable to press with the way it is mounted.  The handguard had to be drilled into so the IWC QD mount could be installed.  The QD mount is held by a ring similar to a piston ring found on motorcycles but smaller and set screws.   Parts List: BCM M4 SOCOM upper  BCM carrying handle BCM FA BCG Midwest Industries FSP rail Inforce APL IWC QD Mount RRA CAR handguard BCM H buffer/tube/spring Colt N marked Fiberite stock Mega lower w/ PSA LPK and ACT ALG BFG VCAS Sling BCM win
Zoom Info
tacblog1: mattelrifle: Finished my carbine.  The goal was to keep a home defense/SHTF because of massive earth quake carbine simple and low cost without sacrificing quality.  Quick plug for Dennis Todd (DToddMG@aol.com).  Dennis is a collector with hard to find firearm parts.  I bought an N marked Colt fiberite stock from him which Colt does not make anymore.  It is a battle used stock (rack number still on it, I didn’t paint that nor would I ever) because Dennis sold out of newer condition stocks, so if you’re looking for something that is out of production he might have it.  The weapon light pictured is an Inforce APL (200 lumens w/ 1.5hrs run time) mounted on a Midwest Industries FSP rail.  I picked the APL because it has a momentary/constant setting and is comfortable to press with the way it is mounted.  The handguard had to be drilled into so the IWC QD mount could be installed.  The QD mount is held by a ring similar to a piston ring found on motorcycles but smaller and set screws.   Parts List: BCM M4 SOCOM upper  BCM carrying handle BCM FA BCG Midwest Industries FSP rail Inforce APL IWC QD Mount RRA CAR handguard BCM H buffer/tube/spring Colt N marked Fiberite stock Mega lower w/ PSA LPK and ACT ALG BFG VCAS Sling BCM win
Zoom Info

tacblog1:

mattelrifle:

Finished my carbine.  The goal was to keep a home defense/SHTF because of massive earth quake carbine simple and low cost without sacrificing quality.  Quick plug for Dennis Todd (DToddMG@aol.com).  Dennis is a collector with hard to find firearm parts.  I bought an N marked Colt fiberite stock from him which Colt does not make anymore.  It is a battle used stock (rack number still on it, I didn’t paint that nor would I ever) because Dennis sold out of newer condition stocks, so if you’re looking for something that is out of production he might have it.  The weapon light pictured is an Inforce APL (200 lumens w/ 1.5hrs run time) mounted on a Midwest Industries FSP rail.  I picked the APL because it has a momentary/constant setting and is comfortable to press with the way it is mounted.  The handguard had to be drilled into so the IWC QD mount could be installed.  The QD mount is held by a ring similar to a piston ring found on motorcycles but smaller and set screws.  

Parts List:

BCM M4 SOCOM upper 

BCM carrying handle

BCM FA BCG

Midwest Industries FSP rail

Inforce APL

IWC QD Mount

RRA CAR handguard

BCM H buffer/tube/spring

Colt N marked Fiberite stock

Mega lower w/ PSA LPK and ACT ALG

BFG VCAS Sling

BCM win

To Tumblr, Love Pixel Union